TECHNICAL SPECIFICATION OF DRAW TEXTURISING MACHINE MODELHSS - AX3-N

portfolio img
1 EQUIPMENT Draw Texturising Machine Himson Super Set – AX3–N
2 Main Specifications
a. Products Polyester 30 De to 300 De
b. No. of Positions 312
c.Mechanical Speed 400 to 1100 mpm
d. Draw Ratio Optional settings values within the above speed range.
e. Direction of twist All “S” all “Z” or alternate S and Z
f. Heating device Double Heater Type
g. Dimensions ( L x W x H) 22.0 x 6.80 x 4.85 meters
3 UTILITY
a. Electrical Power Rated input voltage /C 415 ± 10 % Frequency 50 HZ ± 0.5 HZ Supply 3 Wire + Earth + Ground Connected Power Motors – 88 KW with NFR Heaters – 84.5 KW Total – 172
b. Compressed Air Needed only while using interlancing jets Qty and quality of supply as per jet Selection.
c. Air Conditioning Room temperature 26 ° C ± 2° C
d. ( Only recommendation ) Relative Humidity 60 – 65 %
e. Apron System Individual sprung apron carriers for precise yarn control
Yarn traverse over nip 1 FR – 12 mm 2 FR – 12 mm NFR – 12 mm
f. Take up system 312 sets
1. Cradle Mandril less cradle
2. Tailing Device RH Side
3. Bi-conical Angle 3° – 9°- 8°
4. Traverse Length 250 mm
5. Package dia 250 mm
6. Maximum Package Weight 6 Kg.
7. Take up tube 290 mm long 69 mm Ø or 57 mm Ø
8. Traverse System Oil bath lubricated, 4 position unitswith optimized cam profile
9. Traverse Speed Upto 600 double stroke per meter
10. Package build device Axial disturber with inverter controlled Programmable motor units 6 per set programmes for winding
g. Oiling System 1 set
1. Type Lick roller system with grooved rollers
2. Oil feed Gravity feed with oil level control tank
3. Day tank 200liter capacity storage
4. Roller Speed Variable rmp 1 to 22
h. Fume Exhaust 1 set
i Yarn suction 1 set
j. Yarn cutters 26 sets ( 12 cutters each )
Type cut and hold type
k. Detectors 26 sets (12 each)
Type Non contact type
l. Drivers 1 set
1. Driver System

Motors for individual feed-speed control by inverters

2. Capacity of Motor
1FR - 3.7 KW x 2 – 7.4
2FR - 11.0 KWx1 –11.0
NFR - 7.5 KW x 1 –7.5
3FR - 7.5 KW x 1 – 7.5
WR - 11.0 KWx1 – 11.0
TU - 11.0 KW x 2 – 22.0
TCR - 7.5 KW x 1 – 7.5
Suction - 7.5 KW x 1 –7.5
Fume - 2.2KW x 2 –4.4
Other - 2.2 KW - 2.2
TOTAL 88KW
3. Heat
Primary 2.4 KW x 26 = 62.4 KW
Secondary 1.7 KW x 13 = 22.1 KW
84.5 KW
m. Maintenance Platform 1 set
n. Creel Stand 1 set – Box type creel
Option (Rotary Creel)
o. Electric Control System 1 set
4 Specification in Detail
a. 1st Heater 26 Blocks of 12 positions each
Heating System Vapour Phase – High efficiency System
Temperature Range 160 °C to 250 ° C
Length of Heater 1.6 meters
Option
a) Length 1.6 meters
Type Close
b) Length 1.6 meters
Type Open
c) Length 2 meters
Type open / close
b. 2nd Heater 13 Blocks of 24 positions each.
Heating system Vapour Phase – High efficiency System
Temperature Range

140° C to 230 ° C

Length of Heater 1.4 meters
c. Cooling Devices 312 sets
Cooling Zone Length 1.25 meters
Type of Cooling Device Natural air cooled tack Nitrogensed and Ultra finished yarn contact area.
d. Twisting Units 312 sets
Type Tri axial spindle – optimized geometry
HE-1 (Standard Supply)
Working dics Polyurethane
54.5 Ø – 9mm thick
Dics combination 1-4-1
Guide Disc Solid Ceramic
Driving System Tangential Belts
Threading Portable Threader
e. feed System 312 sets
1. No. of feeds 1 FR – Nip Roller
2 FR – Apron System
NFR – Nip Roller (Only for AX 3N)
3 RF – Nip Roller
Optional
  1) This machine can be also supplied in 336 spindles, 360 spindles (split type)
2) Co – mingling attachment- including extra set of detectors, guide, & bracket
3) Manifolds – Air jets manifolds at intermediate position
4)Apron – at input / output in lieu of Nip Roller